SCREW CONVEYOR

For horizontal or inclined transportation of materials screw conveyer is applicable. They are handy for indoor transport of dirty materials, which are most often the case in the treatment of municipal wastewater.

Depending on the material to be transported screw transporter will be coil with the shaft or coil without shaft.

Common uses:

  • Transport of waste from grids, including pressing and drainage of material
  • Transport of sand
  • Transport of powder material
  • Transfer of granular materials
  • Transport of sludge.

CLASSER

They are intended for the separation and washing of collected material from sand trap or similar.

Materials in use are AISI 304, 316, 316L.

SCROLL DOSAGE DEVICE DISPENSERS

They are intended for the dosing of material in the systems with powder.

Materials in use are AISI304, 316, 316L.

DECANTER

Decanter is in use for quick discharge reactors during SBR technology of water treatment.

Common materials are AISI304, 316, 316L.

Available sizes for decanter are DN 100, DN150, DN 200, DN250 and DN 300.

Decanter consists of inflow pipe with rotating assembly and discharge tube collector., motor with gear assembly, floating switches and control cabinet.

SECTIONAL SHUTTER

Available sizes are for:

channel width 300-3000 mm

segment height 200-600 mm.

 
 

LOCKSMITH PRODUCTS

Non-return flap

Materials: steel zinc-coated or steel protected by epoxy paint or AISI 304, 316.

Available sizes: DN 200-DN 1200.

Climbing frames with back protection

Materials: steel zinc-coated or steel protected by epoxy paint or AISI 304, 316.

Available sizes: as per request.

Climbing frames with manhole cover

Materials: steel zinc-coated or steel protected by epoxy paint or AISI 304, 316.

Available sizes: as per request.